New DairyClean DESTROYER cleans burned on deposits in food & beverage processing plants
Madison Chemical introduces DairyClean DESTROYER, a non-foaming, heavy-duty, alkaline food plant detergent for in-place or recirculation cleaning of tough food processing soils, including burned-on deposits. Proven in dairy and juice plants as a heavy-duty CIP cleaner in HTST’s, separators, evaporators, and other equipment where heavy burn on deposits are likely. DairyClean DESTROYER acts both chemically and physically on typical food plant soils. It saponifies and emulsifies oils and fats, disperses proteinaceous soils, breaks down carbohydrates and can penetrate cooked on food residues. Good wetting and rinsing characteristics with little or no foaming permit fast cleaning at high recirculation velocities.
For best results, use DairyClean DESTROYER at 0.5 to 6% by volume at 120°F to 190°F. For recirculation cleaning, 0.5% to 1% by volume is normally sufficient. Exact dilutions dependent upon the specific nature of the application.
DairyClean DESTROYER is acceptable for use in food and beverage plants as an A2 compound for use only in soak tanks or with steam or mechanical cleaning devices in all departments. Before using, food products and packaging materials must be removed from the room or carefully protected. After use, all surfaces must be thoroughly rinsed with potable water.
When used according to manufacturer’s instructions, no residue or odor is noticeable after use. Product is generally used at ambient temperatures to 140°F, with exact dilutions dependent on specific application requirements.
For additional information visit www.madchem.com.